Benferflex+S1 White Adhesive - 25kg


Title: EACH
Price:
Sale price£14.50
Stock:
In stock (591 units), ready to be shipped

Description

BENERFLEX +S1 Extra White High Yield is a powder adhesive consisting of cements, graded particle size aggregates, synthetic resins and special additives. It has been formulated and developed for a rapid, reliable installation of ceramic, porcelain & natural stone tiles, even on non-absorbent substrates and onto substrates subject to slight dimensional variation. Thanks to its particular composition, Benerflex +S1 can be mixed with a higher percentage of water to allow for complete "wetting" of the back of tiles, even on large format tiles, with no need for back buttering.

Laying of porcelain tiles, thin ceramic slabs, non-absorbent single-fired tiles, double-fired tiles, and natural stones (water-stable), even large size, and glass mosaic in:
- Interior and exterior walls and floors
- Heavy-duty areas
- On top of old wall and floor tiles

Suitable For Use On:


- Interior & exterior walls & floors
- Concrete
- Cement-based screeds
- Anhydrite screeds
- Cement-based & Gypsum-based boards
- Heavy-duty areas
- In conjunction with waterproofing systems
- On top of old wall & floor tiles

Specification

Classification EN 12004: C2TES1 
Basis: Cement, aggregates, additives
Colour: Extra white
Apparent mass volume: 1,1 kg/m³
Maximum grain size: 0,3 mm
Storage and Duration: 12 months in the original closed package in a cool dry place
Danger of harm: No, Possible irritation of the eyes and skin upon contact
Flammability: No
Mixture ratio: 32%, 8 lt water/25 kg bag; 38-40%, 9,5-10 lt for 25 kg bag (flow bed)
Mixture consistency: Cream
Mass volume of paste: 1,7 kg/dm³
Application temperature: From + 5° C to + 35° C
Pot Life: 3 hours*
Open time: 30 minutes*
Vertical slip according to EN1308: < 0,5 mm
Maximum thickness: 20 mm
Foot traffic: 12 hours*
Grouting: 12 hours*
Full service conditions after: 7 days*
Final hardening: 28 days*

Coverage 4-5m² @ 10mm bed.

Mixing ratio:

  • 8.0 Litres of water to 25kg bag (Thixotropic mix)
  • 9.5-10 litres of water to 25kg bag (Flow-bed mix)
  • Allow to stand for 2 minutes, then re-mix.

How Many Bags Do I Need?

If you are not sure how many bags of adhesive you need to complete your project speak with one of our experts on 020 8768 7137 or email us at sales@tilersgear.com

Other Products

Benferflex+S1 Grey - 25Kg

You may also like

Recently viewed