HYDRO BAN is a thin, load bearing waterproofing and crack isolation membrane that does not require the use of fabric in the field, coves or corners and bonds directly to a wide variety of substrates. It is a single component self-curing liquid rubber polymer equipped with Microban® antimicrobial technology that forms a flexible, seamless waterproofing membrane.
Uses
• Interior and exterior
• Swimming pools, fountains, and water features
• Shower pans, stalls, and tub surrounds
• Industrial, commercial, and residential bathrooms and
laundries
• Spas and hot tubs
• Kitchens and food processing areas
• Terraces and balconies over unoccupied spaces
• Countertops and facades
• Steam rooms (when used with a vapour barrier)
Advantages
• Install tile, thin brick, and stone directly onto HYDRO BAN membrane
• Single component and ready to use — easy and quick to apply using a brush or roller
• Thin; only 0.5–0.8 mm thick when cured
• Anti-fracture up to 3 mm over shrinkage and other non-structural cracks
• No fabric required (for gaps or cracks with up to 3 mm horizontal movement)
• Bonds directly to metal and PVC plumbing fixtures
• Rapid drying — allows for flood test in approximately 2 hours after final cure (at 21°C/50% RH)
• Changes in colour from a light sage to an olive green when cured — lighter colour allows for ease of inspection
• Safe — no solvents and non-flammable
• Equipped with Microban® antimicrobial technology to protect the treated article
• Conforms to EN 14891 DM OP
• Exceeds ANSI A118.10 and A118.12
• IAPMO approved
• “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
Suitable Substrates
• Concrete
• Cement Mortar
• Cement Plaster
• CMU
• Brick
• Gypsum Wallboard
• Exterior Glue Plywood (Interior Only)
• Cement fiber board
• Ceramic Tile and Stone
• Ceramic Tile and Stone
• Cement Terrazzo
Packaging
Bucket - 20 kg
Pallet - 27 Buckets
Approximate Coverage / Consumption
0,95 kg/m2 (with two coats)
